JavaScript must be enabled in order for you to use www.AwningTime.com. Please click here for simple Instructions or call 1-888-795-9441 to speak with an awning specialist.
- Description
- Specifications
- Installation
- For Architects
Retractable Pergola Awning
You Should Consider a Retractable Pergola Awning if you desire a convenient, reliable and extensive weather-protection system.
Price This Pergola
Pergola Characteristics
- Widths: 7' 0" to 18' 0"
- Projections: 6' 6" to 16' 4"
- Sattler Fabric Showroom
- Sunbrella Fabric Showroom
Pergola Description
Can’t leave the conditions to chance? Whatever the weather, the Pergola Retractable Awning System will keep you shaded and dry!
The Pergola Retractable Awning System is the ideal sun and weather protection for homes and restaurants where wind, rain and sun protection is essential. A support profile under the guide rails provides the system with high stability, so the Pergola System is able to withstand significant wind and rain.
The Pergola System is quick and easy to assemble by securely attaching the support profile to a flush-mounted plate or recessed pole. Powerful integrated gas-filled cylinders ensure the fabric remains taut in any position.
An RTS electric Somfy operator with optional remote control provides effortless operation. Even in inclement weather, the Retractable Pergola Awning System provides reliable, economical protection.
Be sure to click on the tabs at the top of this page for Sundown Retractable Pergola Awning Specifications, Installation & CAD for Architects.
Typical Installations
Click images to enlarge.
Pergola Specification
Motorized Pergola awning with Acrylic awning cover. Retraction and extension via tubular AC motor 115V/60Hz with, thermal-protection friction brake and electronic end stops. Protection class IP54 (splash water), with 60” connection cable. Top box made of extruded aluminum, in one piece, rounded, to support the assembly structure, with profile groove for guide support. Cheek made of cast aluminum to hold the roller tube bearing or motor bearing. The awning is mounted to the facade by adjustable brackets made of cast aluminum or by ceiling mount. Roller tube made of galvanized steel with groove for the cover. Front profile made of extruded aluminum chamber profile with grooves for the cover and the runner for the pull and push mechanism. When retracted the front profile fits flush with the top box. Guide rails made of extruded aluminum. Guide rails with slide grooves for the PVC glider, hollow chamber for the integrated gas filled cylinder and stainless steel cable system for the cover transport. The guide rails are fitted with a front profile stop for a perfect cover tension.
The installation can be placed with a lateral overhang of up to 39” (right and left). The guide rails are supported by posts made of extruded aluminum and mounted into galvanized floor sleeves, two concrete flower tubs with integrated floor sleeves or foot plates. All visible screws are stainless steel.
Installation Information
(805 KB) PDF Document detailing the installation of the PergolaCAD Drawings for Architects
CAD files (.dxf) are in the German language and use centimeters.
